Brunton Shaw

Minestar 6

E-mail Print

Typical constructions: 6x36SW(1-7-7+7-14) - CWR
                                        6x41SW(1-8-8+8-16) - CWR
                                        6x49SW(1-8-8-8+8-16) - CWR

                6x41ws        6px41ws           6x41wspir

qm_vertical
  • Minestar 6 is a high quality rope used for dragline and face shovel applications.
  • Can be supplied with a plastic impregnated core or Fully PIR which is ideal for applications where longer service life is required.
  • Independent wire rope core.
  • A sample of rope from each production batch is tested to destruction in order to confirm compliance with catalogue breaking force values - LOADRITE.
  • Fully lubricated in manufacture - LUBERITE. 
  • +2% to +4% close diameter tolerance for improved spooling control - SIZERITE.
  • Galvanised (B) finish as standard.
  • RHOL (sZ) as standard but available in other lay directions.
  • Supplied in high strength 1960 N/mm2 grade as standard. 

Nominal Rope Diameter

 

Approx. Rope Diameter

 

Approx.Length

Mass (M)
In Air

Minimum Breaking Force (Fmin)

Metallic CSA (A)

 

Galvanised and Ungalvanised
Rope Grade
1770N/mm2 1960N/mm2
mminchKg/100mkN tonnes kN tonnes mm2
36 531 817 83.3 904 92.2 620
40 655 1010 103 1120 114 766
44   793 1220 124 1350 138 927
48 1 7/8  943 1450 148 1610 164 1103
52 1111 1700 173 1890 193 1294
56   1281 1980 202 2190 223 1501
60  2 3/8 1471 2270 231 2510 256 1723
64 2 1/2 1673 2582 263 2861 292 1962
68 1889 2915 297 3230 329 2215
72 2118 3268 333 3620 369 2483
76 3 2360 3640 371 4033 411 2766
80 2614 4034 411 4469 456 3065
84 2882 4447 453 4927 502 3379
88 3163 4881 498 5408 551 3709
90 3 1/2 3309 5105 521 5656 577 3879

Note:- Intermediate sizes also available.

 
You are here: Home Products Mining & Quarrying Minestar 6