Brunton Shaw

Minemaster 6

E-mail Print

Typical Constructions: 6xK36SW(1-7-7+7-14) -CWR
                                          6xK41SW(1-8-8+8-16) - CWR

mm6   mm6p    mm6pir

 

CM6ROPE
qm_vertical
  • Minemaster 6 is a high strength rugged six strand rope used for dragline and face shovel applications.
  • Can be supplied with a plastic impregnated core or Fully PIR, which is ideal for applications where longer service life is required.
  • A sample of rope from each production batch is tested to destruction in order to confirm compliance with catalogue breaking force values - LOADRITE.
  • Minemaster 6 can be substituted for any six strand conventional rope construction to improve service life and reduce total cost.
  • High fatigue life resulting from unique compaction process.
  • Maximum resistance to crushing. Recommended for multi-layer spooling operations.
  • Increased abrasion resistance resulting from the unique compaction process.
  • Fully Lubricated in manufacture - LUBERITE.
  • +2% to +4% close diameter tolerance SIZERITE for improved spooling control.
  • Galvanised (B) finish as standard.
  • RHOL (sZ) as standard but available in other lay directions.

Nominal Rope Diameter

 

Approx. Rope Diameter

 

Approx.Length

Mass (M)
In Air

Minimum Breaking Force (Fmin)

Metallic CSA (A)

 

Axial Stiffness @ 20% of MBL

 

Galvanised and Ungalvanised
Rope Grade
1960N/mm2 2160N/mm2
mminchKg/100mKg/100m tonnes kN tonnes mm2MN
38 1-1/2 643 1165 118 1192 121 749 73
40   715 1295 132 1363 139 829 81
42 1-5/8 791 1425 145 1500 153 914  90
44   859 1505 153 1648 168 1004 98
46 929 1665 169 1795 183 1097 108
48 1-7/8 1030 1885 192 1950 199 1194 117
50 1120 1975 201 2110 215 1296 127
52 2 1190 2135 217 2275 232 1402 137
 
You are here: Home Products Mining & Quarrying Minemaster 6