Brunton Shaw

Cranestar 35/35P

E-mail Print

Typical construction: 35x7(1x7-6x7-6x7+6x7:16x7)

Typical Applications
cm35 applications

CS35PCS35
mobiletoweroffshore
cs35rope
qmb_vertical

 

  • Cranestar 35/35P is a flexible high strength hoist rope.
  • A sample of rope from each production batch is tested to destruction in order to confirm compliance with catalogue breaking force values - LOADRITE.
  • Maximum resistance to rotation - BALANCERITE.
  • Suitable for use on single part and multi part hoist reeving systems.
  • Fully lubricated in manufacture - LUBERITE.
  • 35P ropes have polymer interface between core and outer strands.
  • +2% to +4% close diameter tolerance for improved spooling control - SIZERITE.
  • Galvanised (B) finish as standard.
  • RHLL (zZ) as standard but available in other lay directions.

 

Nominal Rope Diameter

 

Approx. Rope Diameter

 

Approx.Length

Mass (M)
In Air

Approx. Length

Mass (M)
In Water

Minimum Breaking Force (Fmin)

Metallic CSA (A)

 

Galvanised and Ungalvanised
Rope Grade
1960N/mm2 2160N/mm2
mminchKg/100mKg/100m kN tonnes kN tonnes mm2
13 1/2  75.6 66.0 128  13.1 146 14.9  82.0
14   87.4 76.3 148 15.1 168 17.1 96.0
15   100 87.3 171 17.4 191  19.5 110
16   5/8 114 99.5 194 19.8 221 22.5 125
17    128 112 217 22.1 241 24.6 141
18    144 126 242 24.7  277 28.2 158
19  3/4  161 140 277 28.2 312 31.8 176
20    179 156 301 30.7 337 34.4 195
21 13/16 196 171 335 34.2 370 37.7 215
22 7/8 220 192 370 37.7  412 42.0 236
23 236 206 400 40.8 448 45.7 258
24 15/16  257 224 441 45.0  498 50.8 281
25   278 243 473 48.2  537 54.8 305
26 302 264 517 52.7  581 59.2 330
27  325 284 549 56.0 632 64.5 356
28   349 305 599 61.1 681 69.4 383
30   399 348 679 69.2 775 79.0 439
32  1 1/4 456 398 769 78.4  865 88.2 500
 
You are here: Home Products Crane Cranestar Cranestar 35/35P