Brunton Shaw

Cranestar 18

E-mail Print

Typical Construction: 18x7 (1x7-6x7-12x7)                               

Typical applications

main_hoist
cs18
mobiletower

qmb_vertical
  • Cranestar 18 is a high quality rotation resistant hoist rope.
  • A sample of rope from each production batch is tested to destruction in order to confirm compliance with catalogue breaking force values - LOADRITE.
  • Good resistance to rotation - BALANCERITE.
  • Consistent performance.
  • Also available in fibre core construction.
  • +2% to +4% close diameter tolerance for improved spooling control - SIZERITE.
  • Fully lubricated in manufacture - LUBERITE.
  • Galvanized (B) finish as standard.
  • RHLL (zZ) as standard but available in other lay directions.

Nominal Rope Diameter

 

Approx. Rope Diameter

 

Approx.Length

Mass (M)
In Air

Approx. Length

Mass (M)
In Water

Minimum Breaking Force (Fmin)

Metallic CSA (A)

 
Galvanised and Ungalvanised
Rope Grade
1960N/mm2

2160N/mm2
mminchKg/100mKg/100m kN tonnes kN tonnes mm2
8 5/16  25.8 22.5 40.0 4.08 48.6 5.0 30.0
9   33.3 29.1 52.1 5.31 61.0 6.2 38.0
10   40.4 35.3 64.2 6.55 75.6 7.7 47.0
11 7/16 48.7 42.5 75.6 7.71 90.7 9.3 57.0
12   60.3 52.6 89.9 9.17 109 11.1 67.0
13 1/2 70.0 61.1 106 10.8 127 13.0 79.0
14
81.7 71.3 123 12.5 148 15.1 92.0
15   92.9 81.1 144 14.7 169 17.3 105
16 5/8 105 91.6 160 16.5 194 19.8 120
18
133 116 202 20.6 244 24.9 151
19 3/4 147 128 226 23.0 273 27.9 169
20   161 140 250 25.5 301 30.7 187
22 7/8 196 171 305 31.1 366  37.3 226
24   237 207 363 37.0 434 44.3 269
26 1 278 242 426 43.4 510 52.0 316
 
You are here: Home Products Crane Cranestar Cranestar 18