Cranemaster 28

Typical Construction: 28x7 (4x7-4x7+4x7 :16xk7)

Typical applications

High strength low rotation hoist ropes.
A sample rope from each production batch is tested to destruction in order to confirm compliance with catalogue breaking force values - LOADRITE.
Good resistance to rotation - BALANCERITE.
Suitable for use on single part and multi-part hoist reeving systems.
16 outer strands compacted to improve fatigue life.
Increased resistance to crushing. Recommended for multi layer spooling operations.
+2% to +4% close diameter tolerance for improved spooling control - SIZERITE.
Fully lubricated in manufacture - LUBERITE.
Galvanized (B) finish as standard.
RHLL (zZ) as standard but available in other lay directions.

Nominal Rope Diameter	Approx. Rope Diameter	Approx.Length Mass (M) In Air	Approx. Length Mass (M) In Water	Minimum Breaking Force (F_min)		Metallic CSA (A)
				Galvanised and Ungalvanised
				Rope Grade
				2160N/mm²
mm	inch	Kg/100m	Kg/100m	kN	tonnes	mm²
7		21	18	41.0	4.18	25
7.2		23	20	42.9	4.37	27
8	5/16	28	24	57.9	5.90	33
8.5		32	28	65.7	6.70	37
9		36	31	73.0	7.44	42
	3/8	40	35	82.2	8.38	47
10		44	38	90.6	9.24	51
11		54	47	108	11.01	62
12		65	57	130	13.26	74
	1/2	72	63	146	14.89	83
13		76	66	155	15.81	87
14		87	76	177	18.05	101
	9/16	90	79	184	18.76	105
15		100	87	203	20.70	115
16	5/8	114	99	232	23.66	131
17		130	113	262	26.72	148
18		144	126	295	30.08	166
19	3/4	160	140	326	33.24	185
20		179	156	363	37.02	205
21		191	167	360	36.71	226
22	7/8	211	184	393	40.08	248
23		227	198	431	43.95	271
24		249	217	466	47.52	296
25		272	237	509	51.90	321
	1	280	244	525	53.54	331
26		296	258	554	56.49	347
27		316	276	589	60.06	374
28		344	300	633	64.55	402
	1 1/8	356	311	665	67.81	419
29		365	318	685	69.85	432
30		386	337	732	74.64	462
32	1 1/4	447	390	836	85.25	525
34		498	435	944	96.25	593
	1 3/8	524	457	976	99.52	626
36		561	490	1058	107.89	665

You are here: Home

Products

Cranemaster 28

Brunton Shaw