Brunton Shaw

MineMaster 8

E-mail Print

Typical Constructions: 8PIxK26SW(1-5-5+5-10) -CWR

                                8PIxK31SW(1-6-6+6-10) -CWR

        mm8  CM8P  mm8x26pir
CM8PROPE
qm_vertical
  • Minemaster 8 is a high strength eight strand rope used for dragline and face shovel applications.
  • Can be supplied with a plastic impregnated core or Fully PIR which is ideal for applications where longer service life is required.
  • A sample of rope from each production batch is tested to destruction in order to confirm compliance with catalogue breaking force values - LOADRITE.
  • Great surface contact area resulting from the eight strand construction and compacted finish give longer rope life and reduced sheave wear. 
  • High fatigue life resulting from unique compaction process
  • Increased resistance to crushing. Recommended for multi layer spooling operations.
  • Increased abrasion resistance resulting from unique compaction process.
  • +2% to +4% close diameter tolerance for improved spooling control - SIZERITE.
  • Fully lubricated in manufacture - LUBERITE.

Nominal Rope Diameter

 

Approx. Rope Diameter

 

Approx.Length

Mass (M)
In Air

Minimum Breaking Force (Fmin)

Metallic CSA (A)

 

Axial Stiffness @ 20% of MBL

 
Galvanised and Ungalvanised
Rope Grade
1960N/mm2 2160N/mm2
mminchKg/100m kN tonnes kN tonnes mm2MN
38 1-1/2 681 1270 129 1354 138 737 71
40   752 1407 143 1501 153 817 78
42 1-5/8 800 1535 156 1648 168 901 86
44   878 1702 173 1815 185 988 95
46   960 1858 189 1982 202 1080 104
48 1-7/8 1044 2025 206 2158 220 1176 113
50   1135 2205 225 2345 239 1276 122
52 2 1219 2340 239 2490 254 1380 132
54   1320 2530 258 2680 273 1489 143
56 2-1/4 1424 2720 277 2890 295 1601 154
58   1523 2920 298 3100 316 1717 165
60   1644 3122 318 3315 338 1838 176
 
You are here: Home Products Mining & Quarrying MineMaster 8P